PIPE & TUBE CUTTER 3 - 30MM
Click Image for Gallery
Pipe cutter
![](images/torkcraft/handtools/pipecutters/pc330_sm2.jpg)
Range: Ø3-30mm
OD
Application:
The pipe cutter can cut the following materials to length:
- Aluminium
- Copper
- Stainless steel (light gauge)
- Steel
- Polypropylene
- PVC
Pipe cutter
![](images/torkcraft/handtools/pipecutters/pc330_sm1.jpg)
Features:
- Retractable deburring tool.
- Precision draw back system to ensure precision cutting.
- The working zone can be adjusted easily.
- There is a spare cutting wheel in the handle.
- Duramant exterior coating for added grip to the handle.
- Slotted guide rollers.
Pipe cutter
How to use the pipe cutter:
- When using in cold conditions - Place the pipe in lukewarm water to raise the temperature a bit to avoid cracking.
- Loosen the handle to allow the pipe to fit.
- Align the cutting blade to where the cut needs to be made according to the correct length.
- Tighten the handle until the cutter blade lightly touches the pipe.
- Make sure the pipe is supported by the two rollers.
- Cutting the pipe: Rotate the pipe cutter around the pipe.
- For every rotation the pipe cutter goes around the pipe, tighten the handle an eighth of a turn. See diagram below.
- Keep repeating the process until the pipe is cut completely through.
- Use the deburring tool to deburr any burr that might have been caused by the cutting blade.
- Replace the cutting blade should it be worn or damaged.
consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
![]() |
![]() |
![]() |
![]() |
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|